VetoPerf analysis over V1:Hrec_hoft_16384Hz


Summary

VetoPerf version:3.2.0: documentation gitlab repository
VetoPerf run by:unknown
VetoPerf processing time:0 h, 21 min, 1 s
Processing Date:Fri Jun 20 17:30:47 2025 (UTC)
Requested start:1433251331 → Fri Jun 6 13:21:53 2025 (UTC)
Requested stop:1433662376 → Wed Jun 11 07:32:38 2025 (UTC)
Requested livetime:256511 sec → 2.969 days
Requested segments:vp.insegments.txt
Summary text file:vp.summary.txt

Triggers (V1:Hrec_hoft_16384Hz - OMICRON)

Number of raw triggers:48226537
Number of raw clusters:34915
Number of active clusters:34915 (SNR > 5.000) 6124 (SNR > 8.000) 5110 (SNR > 10.000) 3304 (SNR > 20.000)

Vetoes

Number of vetoes:100
Dead time: Integrated time when the veto is active. We note d the fraction of the total livetime (256511 s) when the veto is active.
Efficiency (ε):This is the fraction of V1:Hrec_hoft_16384Hz triggers which are vetoed.
ε/d:This factor is larger than 1 when the veto rejects more triggers than a random veto.
V1:Hrec_hoft_16384Hz: 34915 clusters

V0: V1:NCal_WEN_rotor_freq_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V1: V1:NCal_WEN_rotor_phase_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V2: V1:NCal_WEN_rotor_phase_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V3: V1:NCal_WEN_rotor_phase_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V4: V1:NCal_WEN_rotor_phase_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V5: V1:NCal_WE_hInj_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V6: V1:NCal_WE_mag_geneE_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V7: V1:NCal_WE_mag_geneS_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V8: V1:NCal_WNF_pos_Lateral_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V9: V1:NCal_WNF_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V10: V1:NCal_WNM_pos_Axial_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V11: V1:NCal_WNM_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V12: V1:NCal_WNN_box_T_Volts_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V13: V1:NCal_WNN_microphone_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V14: V1:NCal_WNN_motor_T_Volts_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V15: V1:NCal_WNN_motor_cmd_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V16: V1:NCal_WNN_motor_cmd_V_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V17: V1:NCal_WNN_motor_enbl_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V18: V1:NCal_WNN_motor_enbl_safe_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V19: V1:NCal_WNN_pos_Lateral_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V20: V1:NCal_WNN_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V21: V1:NCal_WNN_rotor_freq_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V22: V1:NCal_WNN_rotor_freq_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V23: V1:NCal_WNN_rotor_freq_enable_boost_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V24: V1:NCal_WNN_rotor_freq_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V25: V1:NCal_WNN_rotor_freq_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V26: V1:NCal_WNN_rotor_phase_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V27: V1:NCal_WNN_rotor_phase_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V28: V1:NCal_WNN_rotor_phase_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V29: V1:NCal_WNN_rotor_phase_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V30: V1:NCal_WSF_pos_Lateral_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V31: V1:NCal_WSF_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V32: V1:NCal_WSM_pos_Axial_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V33: V1:NCal_WSM_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V34: V1:NCal_WSN_box_T_Volts_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V35: V1:NCal_WSN_microphone_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V36: V1:NCal_WSN_motor_T_Volts_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V37: V1:NCal_WSN_motor_cmd_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V38: V1:NCal_WSN_motor_cmd_V_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V39: V1:NCal_WSN_motor_enbl_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V40: V1:NCal_WSN_motor_enbl_safe_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V41: V1:NCal_WSN_pos_Lateral_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V42: V1:NCal_WSN_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V43: V1:NCal_WSN_rotor_freq_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V44: V1:NCal_WSN_rotor_freq_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V45: V1:NCal_WSN_rotor_freq_enable_boost_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V46: V1:NCal_WSN_rotor_freq_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V47: V1:NCal_WSN_rotor_freq_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V48: V1:NCal_WSN_rotor_phase_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V49: V1:NCal_WSN_rotor_phase_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V50: V1:NCal_WSN_rotor_phase_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V51: V1:NCal_WSN_rotor_phase_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V52: V1:NCal_WWF_pos_Lateral_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V53: V1:NCal_WWF_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V54: V1:NCal_WWM_pos_Axial_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V55: V1:NCal_WWM_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V56: V1:NCal_WWN_box_T_Volts_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V57: V1:NCal_WWN_microphone_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V58: V1:NCal_WWN_motor_T_Volts_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V59: V1:NCal_WWN_motor_cmd_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V60: V1:NCal_WWN_motor_cmd_V_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V61: V1:NCal_WWN_motor_enbl_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V62: V1:NCal_WWN_motor_enbl_safe_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V63: V1:NCal_WWN_pos_Lateral_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V64: V1:NCal_WWN_pos_Vertical_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V65: V1:NCal_WWN_rotor_freq_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V66: V1:NCal_WWN_rotor_freq_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V67: V1:NCal_WWN_rotor_freq_enable_boost_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V68: V1:NCal_WWN_rotor_freq_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V69: V1:NCal_WWN_rotor_freq_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V70: V1:NCal_WWN_rotor_phase_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V71: V1:NCal_WWN_rotor_phase_corr_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V72: V1:NCal_WWN_rotor_phase_enable_loop_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V73: V1:NCal_WWN_rotor_phase_err_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V74: V1:NCal_mag_probeE_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V75: V1:NCal_mag_probeN_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V76: V1:NCal_mag_probeS_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V77: V1:NCal_mag_probeSnear_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V78: V1:NEB_NCal_CfgChange_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V79: V1:NEB_NCal_elapsed_time_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V80: V1:NEB_NNC_Tilt_CfgChange_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V81: V1:NEB_NNC_Tilt_elapsed_time_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V82: V1:NEB_PCal_fast_CfgChange_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V83: V1:NEB_PCal_fast_elapsed_time_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V84: V1:NEB_TIMING_moni_CfgChange_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V85: V1:NEB_TIMING_moni_elapsed_time_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V86: V1:NNC_NEB_TILT_ACT1_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V87: V1:NNC_NEB_TILT_ACT2_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V88: V1:NNC_NEB_TILT_CORR_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V89: V1:NNC_NEB_TILT_ERROR_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V90: V1:NNC_NEB_TILT_ERROR_POST_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V91: V1:NNC_NEB_TILT_ERROR_PRE_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V92: V1:NNC_NEB_TILT_GAIN_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V93: V1:NNC_NEB_TILT_ITF_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V94: V1:NNC_NEB_TILT_ITF_CALI_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V95: V1:NNC_NEB_TILT_NOISE_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V96: V1:NNC_NEB_TILT_PickOff_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V97: V1:NNC_NEB_TILT_TEMP_ACT_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V98: V1:NNC_NEB_TILT_Temp_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


V99: V1:NN_CEB_ACC_Z_101_0 (ε = 0.000%, ε/d = 0.000) [click here to expand/hide] [link to here]


Florent Robinet, florent.robinet@ijclab.in2p3.fr