UPV analysis over V1:Hrec_hoft_16384Hz


upv ./segments.txt ./parameters.txt 

Summary

UPV version:3.2.0: documentation gitlab repository
UPV run by:unknown
UPV processing time:5 h, 0 min, 33 s
Processing Date:Thu Feb 13 14:49:34 2025 (UTC)
Requested start:1420288240 → Tue Jan 7 12:30:22 2025 (UTC)
Requested stop:1421478029 → Tue Jan 21 07:00:11 2025 (UTC)
Requested livetime:825629 sec → 9.556 days
Requested segments:upv.insegments.txt
Summary text file:upv.summary.txt
Number of source channels:100 (out of 100)

Parameters

Configuration:upv.parameters.txt
Target SNR selection:SNR > 7.000
Target frequency selection:16.000 Hz < f < 1956.764 Hz
Coincidence time window:δt = 1.000 s
Veto definition:use-percentage > 0.400 (per frequency bin)
number of used source clusters > 10 (per frequency bin)

Target = V1:Hrec_hoft_16384Hz

Note: these plots includes the triggers used in the VetoPerf report: the selection can be different from the one used for UPV.


Veto performance

The veto performance has been measured. See the VetoPerf report.


V0 (0): V1:NN_CEB_ACC_Z_108_0 [click here to expand/hide] [link to here]


V1 (0): V1:NN_CEB_ACC_Z_107_0 [click here to expand/hide] [link to here]


V2 (0): V1:NN_CEB_ACC_Z_106_0 [click here to expand/hide] [link to here]


V3 (0): V1:NN_CEB_ACC_Z_105_0 [click here to expand/hide] [link to here]


V4 (0): V1:NN_CEB_ACC_Z_104_0 [click here to expand/hide] [link to here]


V5 (0): V1:NN_CEB_ACC_Z_103_0 [click here to expand/hide] [link to here]


V6 (0): V1:NN_CEB_ACC_Z_102_0 [click here to expand/hide] [link to here]


V7 (0): V1:NN_CEB_ACC_Z_101_0 [click here to expand/hide] [link to here]


V8 (0): V1:NNC_NEB_TILT_Temp_0 [click here to expand/hide] [link to here]


V9 (0): V1:NNC_NEB_TILT_TEMP_ACT_0 [click here to expand/hide] [link to here]


V10 (0): V1:NNC_NEB_TILT_PickOff_0 [click here to expand/hide] [link to here]


V11 (0): V1:NNC_NEB_TILT_NOISE_0 [click here to expand/hide] [link to here]


V12 (0): V1:NNC_NEB_TILT_ITF_CALI_0 [click here to expand/hide] [link to here]


V13 (0): V1:NNC_NEB_TILT_ITF_0 [click here to expand/hide] [link to here]


V14 (0): V1:NNC_NEB_TILT_GAIN_0 [click here to expand/hide] [link to here]


V15 (0): V1:NNC_NEB_TILT_ERROR_PRE_0 [click here to expand/hide] [link to here]


V16 (0): V1:NNC_NEB_TILT_ERROR_POST_0 [click here to expand/hide] [link to here]


V17 (0): V1:NNC_NEB_TILT_ERROR_0 [click here to expand/hide] [link to here]


V18 (0): V1:NNC_NEB_TILT_CORR_0 [click here to expand/hide] [link to here]


V19 (0): V1:NNC_NEB_TILT_ACT2_0 [click here to expand/hide] [link to here]


V20 (0): V1:NNC_NEB_TILT_ACT1_0 [click here to expand/hide] [link to here]


V21 (0): V1:NEB_TIMING_moni_elapsed_time_0 [click here to expand/hide] [link to here]


V22 (0): V1:NEB_TIMING_moni_CfgChange_0 [click here to expand/hide] [link to here]


V23 (0): V1:NEB_PCal_fast_elapsed_time_0 [click here to expand/hide] [link to here]


V24 (0): V1:NEB_PCal_fast_CfgChange_0 [click here to expand/hide] [link to here]


V25 (0): V1:NEB_NNC_Tilt_elapsed_time_0 [click here to expand/hide] [link to here]


V26 (0): V1:NEB_NNC_Tilt_CfgChange_0 [click here to expand/hide] [link to here]


V27 (0): V1:NEB_NCal_elapsed_time_0 [click here to expand/hide] [link to here]


V28 (0): V1:NEB_NCal_CfgChange_0 [click here to expand/hide] [link to here]


V29 (0): V1:NCal_mag_probeSnear_0 [click here to expand/hide] [link to here]


V30 (0): V1:NCal_mag_probeS_0 [click here to expand/hide] [link to here]


V31 (0): V1:NCal_mag_probeN_0 [click here to expand/hide] [link to here]


V32 (0): V1:NCal_mag_probeE_0 [click here to expand/hide] [link to here]


V33 (0): V1:NCal_mag_geneS_0 [click here to expand/hide] [link to here]


V34 (0): V1:NCal_mag_geneE_0 [click here to expand/hide] [link to here]


V35 (0): V1:NCal_NSN_rotor_state_NS_0 [click here to expand/hide] [link to here]


V36 (0): V1:NCal_NSN_rotor_phase_flt_NS_0 [click here to expand/hide] [link to here]


V37 (0): V1:NCal_NSN_rotor_phase_err_0 [click here to expand/hide] [link to here]


V38 (0): V1:NCal_NSN_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V39 (0): V1:NCal_NSN_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V40 (0): V1:NCal_NSN_rotor_phase_NS_0 [click here to expand/hide] [link to here]


V41 (0): V1:NCal_NSN_rotor_phase_0 [click here to expand/hide] [link to here]


V42 (0): V1:NCal_NSN_rotor_freq_flt_NS_0 [click here to expand/hide] [link to here]


V43 (0): V1:NCal_NSN_rotor_freq_err_0 [click here to expand/hide] [link to here]


V44 (0): V1:NCal_NSN_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V45 (0): V1:NCal_NSN_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V46 (0): V1:NCal_NSN_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V47 (0): V1:NCal_NSN_rotor_freq_NS_0 [click here to expand/hide] [link to here]


V48 (0): V1:NCal_NSN_rotor_freq_0 [click here to expand/hide] [link to here]


V49 (0): V1:NCal_NSN_pos_Vertical_0 [click here to expand/hide] [link to here]


V50 (0): V1:NCal_NSN_pos_Lateral_0 [click here to expand/hide] [link to here]


V51 (0): V1:NCal_NSN_pos_Axial_0 [click here to expand/hide] [link to here]


V52 (0): V1:NCal_NSN_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V53 (0): V1:NCal_NSN_motor_enbl_0 [click here to expand/hide] [link to here]


V54 (0): V1:NCal_NSN_motor_cmd_V_0 [click here to expand/hide] [link to here]


V55 (0): V1:NCal_NSN_motor_cmd_0 [click here to expand/hide] [link to here]


V56 (0): V1:NCal_NSN_motor_T_Volts_0 [click here to expand/hide] [link to here]


V57 (0): V1:NCal_NSN_microphone_0 [click here to expand/hide] [link to here]


V58 (0): V1:NCal_NSN_box_T_Volts_0 [click here to expand/hide] [link to here]


V59 (0): V1:NCal_NSF_rotor_state_NS_0 [click here to expand/hide] [link to here]


V60 (0): V1:NCal_NSF_rotor_phase_flt_NS_0 [click here to expand/hide] [link to here]


V61 (0): V1:NCal_NSF_rotor_phase_err_0 [click here to expand/hide] [link to here]


V62 (0): V1:NCal_NSF_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V63 (0): V1:NCal_NSF_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V64 (0): V1:NCal_NSF_rotor_phase_NS_0 [click here to expand/hide] [link to here]


V65 (0): V1:NCal_NSF_rotor_phase_0 [click here to expand/hide] [link to here]


V66 (0): V1:NCal_NSF_rotor_freq_flt_NS_0 [click here to expand/hide] [link to here]


V67 (0): V1:NCal_NSF_rotor_freq_err_0 [click here to expand/hide] [link to here]


V68 (0): V1:NCal_NSF_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V69 (0): V1:NCal_NSF_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V70 (0): V1:NCal_NSF_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V71 (0): V1:NCal_NSF_rotor_freq_NS_0 [click here to expand/hide] [link to here]


V72 (0): V1:NCal_NSF_rotor_freq_0 [click here to expand/hide] [link to here]


V73 (0): V1:NCal_NSF_pos_Vertical_0 [click here to expand/hide] [link to here]


V74 (0): V1:NCal_NSF_pos_Lateral_0 [click here to expand/hide] [link to here]


V75 (0): V1:NCal_NSF_pos_Axial_0 [click here to expand/hide] [link to here]


V76 (0): V1:NCal_NSF_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V77 (0): V1:NCal_NSF_motor_enbl_0 [click here to expand/hide] [link to here]


V78 (0): V1:NCal_NSF_motor_cmd_V_0 [click here to expand/hide] [link to here]


V79 (0): V1:NCal_NSF_motor_cmd_0 [click here to expand/hide] [link to here]


V80 (0): V1:NCal_NSF_motor_T_Volts_0 [click here to expand/hide] [link to here]


V81 (0): V1:NCal_NSF_microphone_0 [click here to expand/hide] [link to here]


V82 (0): V1:NCal_NSF_box_T_Volts_0 [click here to expand/hide] [link to here]


V83 (0): V1:NCal_NNN_rotor_phase_err_0 [click here to expand/hide] [link to here]


V84 (0): V1:NCal_NNN_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V85 (0): V1:NCal_NNN_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V86 (0): V1:NCal_NNN_rotor_phase_0 [click here to expand/hide] [link to here]


V87 (0): V1:NCal_NNN_rotor_freq_err_0 [click here to expand/hide] [link to here]


V88 (0): V1:NCal_NNN_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V89 (0): V1:NCal_NNN_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V90 (0): V1:NCal_NNN_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V91 (0): V1:NCal_NNN_rotor_freq_0 [click here to expand/hide] [link to here]


V92 (0): V1:NCal_NNN_pos_Vertical_0 [click here to expand/hide] [link to here]


V93 (0): V1:NCal_NNN_pos_Lateral_0 [click here to expand/hide] [link to here]


V94 (0): V1:NCal_NNN_pos_Axial_0 [click here to expand/hide] [link to here]


V95 (0): V1:NCal_NNN_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V96 (0): V1:NCal_NNN_motor_enbl_0 [click here to expand/hide] [link to here]


V97 (0): V1:NCal_NNN_motor_cmd_V_0 [click here to expand/hide] [link to here]


V98 (0): V1:NCal_NNN_motor_cmd_0 [click here to expand/hide] [link to here]


V99 (0): V1:NCal_NNN_motor_T_Volts_0 [click here to expand/hide] [link to here]


Florent Robinet, florent.robinet@ijclab.in2p3.fr