UPV analysis over V1:Hrec_hoft_16384Hz


upv ./segments.txt ./parameters.txt 

Summary

UPV version:3.2.0: documentation gitlab repository
UPV run by:unknown
UPV processing time:1 h, 9 min, 37 s
Processing Date:Fri Jan 19 13:12:16 2024 (UTC)
Requested start:1387467863 → Sun Dec 24 15:44:05 2023 (UTC)
Requested stop:1388080818 → Sun Dec 31 18:00:00 2023 (UTC)
Requested livetime:452973 sec → 5.243 days
Requested segments:upv.insegments.txt
Summary text file:upv.summary.txt
Number of source channels:100 (out of 100)

Parameters

Configuration:upv.parameters.txt
Target SNR selection:SNR > 7.000
Target frequency selection:16.000 Hz < f < 1956.764 Hz
Coincidence time window:δt = 1.000 s
Veto definition:use-percentage > 0.400 (per frequency bin)
number of used source clusters > 10 (per frequency bin)

Target = V1:Hrec_hoft_16384Hz

Note: these plots includes the triggers used in the VetoPerf report: the selection can be different from the one used for UPV.


Veto performance

The veto performance has been measured. See the VetoPerf report.


V0 (0): V1:NCal_NSN_pos_Axial_0 [click here to expand/hide] [link to here]


V1 (0): V1:NCal_NSN_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V2 (0): V1:NCal_NSN_motor_enbl_0 [click here to expand/hide] [link to here]


V3 (0): V1:NCal_NSN_motor_cmd_V_0 [click here to expand/hide] [link to here]


V4 (0): V1:NCal_NSN_motor_cmd_0 [click here to expand/hide] [link to here]


V5 (0): V1:NCal_NSN_motor_T_Volts_0 [click here to expand/hide] [link to here]


V6 (0): V1:NCal_NSN_microphone_0 [click here to expand/hide] [link to here]


V7 (0): V1:NCal_NSN_box_T_Volts_0 [click here to expand/hide] [link to here]


V8 (0): V1:NCal_NSF_rotor_phase_err_0 [click here to expand/hide] [link to here]


V9 (0): V1:NCal_NSF_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V10 (0): V1:NCal_NSF_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V11 (0): V1:NCal_NSF_rotor_phase_0 [click here to expand/hide] [link to here]


V12 (0): V1:NCal_NSF_rotor_freq_err_0 [click here to expand/hide] [link to here]


V13 (0): V1:NCal_NSF_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V14 (0): V1:NCal_NSF_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V15 (0): V1:NCal_NSF_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V16 (0): V1:NCal_NSF_rotor_freq_0 [click here to expand/hide] [link to here]


V17 (0): V1:NCal_NSF_pos_Vertical_0 [click here to expand/hide] [link to here]


V18 (0): V1:NCal_NSF_pos_Lateral_0 [click here to expand/hide] [link to here]


V19 (0): V1:NCal_NSF_pos_Axial_0 [click here to expand/hide] [link to here]


V20 (0): V1:NCal_NSF_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V21 (0): V1:NCal_NSF_motor_enbl_0 [click here to expand/hide] [link to here]


V22 (0): V1:NCal_NSF_motor_cmd_V_0 [click here to expand/hide] [link to here]


V23 (0): V1:NCal_NSF_motor_cmd_0 [click here to expand/hide] [link to here]


V24 (0): V1:NCal_NSF_motor_T_Volts_0 [click here to expand/hide] [link to here]


V25 (0): V1:NCal_NSF_microphone_0 [click here to expand/hide] [link to here]


V26 (0): V1:NCal_NSF_box_T_Volts_0 [click here to expand/hide] [link to here]


V27 (0): V1:NCal_NNN_rotor_phase_err_0 [click here to expand/hide] [link to here]


V28 (0): V1:NCal_NNN_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V29 (0): V1:NCal_NNN_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V30 (0): V1:NCal_NNN_rotor_phase_0 [click here to expand/hide] [link to here]


V31 (0): V1:NCal_NNN_rotor_freq_err_0 [click here to expand/hide] [link to here]


V32 (0): V1:NCal_NNN_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V33 (0): V1:NCal_NNN_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V34 (0): V1:NCal_NNN_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V35 (0): V1:NCal_NNN_rotor_freq_0 [click here to expand/hide] [link to here]


V36 (0): V1:NCal_NNN_pos_Vertical_0 [click here to expand/hide] [link to here]


V37 (0): V1:NCal_NNN_pos_Lateral_0 [click here to expand/hide] [link to here]


V38 (0): V1:NCal_NNN_pos_Axial_0 [click here to expand/hide] [link to here]


V39 (0): V1:NCal_NNN_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V40 (0): V1:NCal_NNN_motor_enbl_0 [click here to expand/hide] [link to here]


V41 (0): V1:NCal_NNN_motor_cmd_V_0 [click here to expand/hide] [link to here]


V42 (0): V1:NCal_NNN_motor_cmd_0 [click here to expand/hide] [link to here]


V43 (0): V1:NCal_NNN_motor_T_Volts_0 [click here to expand/hide] [link to here]


V44 (0): V1:NCal_NNN_microphone_0 [click here to expand/hide] [link to here]


V45 (0): V1:NCal_NNN_box_T_Volts_0 [click here to expand/hide] [link to here]


V46 (0): V1:NCal_NNF_rotor_phase_err_0 [click here to expand/hide] [link to here]


V47 (0): V1:NCal_NNF_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V48 (0): V1:NCal_NNF_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V49 (0): V1:NCal_NNF_rotor_phase_0 [click here to expand/hide] [link to here]


V50 (0): V1:NCal_NNF_rotor_freq_err_0 [click here to expand/hide] [link to here]


V51 (0): V1:NCal_NNF_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V52 (0): V1:NCal_NNF_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V53 (0): V1:NCal_NNF_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V54 (0): V1:NCal_NNF_rotor_freq_0 [click here to expand/hide] [link to here]


V55 (0): V1:NCal_NNF_pos_Vertical_0 [click here to expand/hide] [link to here]


V56 (0): V1:NCal_NNF_pos_Lateral_0 [click here to expand/hide] [link to here]


V57 (0): V1:NCal_NNF_pos_Axial_0 [click here to expand/hide] [link to here]


V58 (0): V1:NCal_NNF_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V59 (0): V1:NCal_NNF_motor_enbl_0 [click here to expand/hide] [link to here]


V60 (0): V1:NCal_NNF_motor_cmd_V_0 [click here to expand/hide] [link to here]


V61 (0): V1:NCal_NNF_motor_cmd_0 [click here to expand/hide] [link to here]


V62 (0): V1:NCal_NNF_motor_T_Volts_0 [click here to expand/hide] [link to here]


V63 (0): V1:NCal_NNF_microphone_0 [click here to expand/hide] [link to here]


V64 (0): V1:NCal_NNF_box_T_Volts_0 [click here to expand/hide] [link to here]


V65 (0): V1:NCal_NEN_rotor_phase_err_0 [click here to expand/hide] [link to here]


V66 (0): V1:NCal_NEN_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V67 (0): V1:NCal_NEN_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V68 (0): V1:NCal_NEN_rotor_phase_0 [click here to expand/hide] [link to here]


V69 (0): V1:NCal_NEN_rotor_freq_err_0 [click here to expand/hide] [link to here]


V70 (0): V1:NCal_NEN_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V71 (0): V1:NCal_NEN_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V72 (0): V1:NCal_NEN_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V73 (0): V1:NCal_NEN_rotor_freq_0 [click here to expand/hide] [link to here]


V74 (0): V1:NCal_NEN_pos_Vertical_0 [click here to expand/hide] [link to here]


V75 (0): V1:NCal_NEN_pos_Lateral_0 [click here to expand/hide] [link to here]


V76 (0): V1:NCal_NEN_pos_Axial_0 [click here to expand/hide] [link to here]


V77 (0): V1:NCal_NEN_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V78 (0): V1:NCal_NEN_motor_enbl_0 [click here to expand/hide] [link to here]


V79 (0): V1:NCal_NEN_motor_cmd_V_0 [click here to expand/hide] [link to here]


V80 (0): V1:NCal_NEN_motor_cmd_0 [click here to expand/hide] [link to here]


V81 (0): V1:NCal_NEN_motor_T_Volts_0 [click here to expand/hide] [link to here]


V82 (0): V1:NCal_NEN_microphone_0 [click here to expand/hide] [link to here]


V83 (0): V1:NCal_NEN_box_T_Volts_0 [click here to expand/hide] [link to here]


V84 (0): V1:NCal_NEF_rotor_phase_err_0 [click here to expand/hide] [link to here]


V85 (0): V1:NCal_NEF_rotor_phase_enable_loop_0 [click here to expand/hide] [link to here]


V86 (0): V1:NCal_NEF_rotor_phase_corr_0 [click here to expand/hide] [link to here]


V87 (0): V1:NCal_NEF_rotor_phase_0 [click here to expand/hide] [link to here]


V88 (0): V1:NCal_NEF_rotor_freq_err_0 [click here to expand/hide] [link to here]


V89 (0): V1:NCal_NEF_rotor_freq_enable_loop_0 [click here to expand/hide] [link to here]


V90 (0): V1:NCal_NEF_rotor_freq_enable_boost_0 [click here to expand/hide] [link to here]


V91 (0): V1:NCal_NEF_rotor_freq_corr_0 [click here to expand/hide] [link to here]


V92 (0): V1:NCal_NEF_rotor_freq_0 [click here to expand/hide] [link to here]


V93 (0): V1:NCal_NEF_pos_Vertical_0 [click here to expand/hide] [link to here]


V94 (0): V1:NCal_NEF_pos_Lateral_0 [click here to expand/hide] [link to here]


V95 (0): V1:NCal_NEF_pos_Axial_0 [click here to expand/hide] [link to here]


V96 (0): V1:NCal_NEF_motor_enbl_safe_0 [click here to expand/hide] [link to here]


V97 (0): V1:NCal_NEF_motor_enbl_0 [click here to expand/hide] [link to here]


V98 (0): V1:NCal_NEF_motor_cmd_V_0 [click here to expand/hide] [link to here]


V99 (0): V1:NCal_NEF_motor_cmd_0 [click here to expand/hide] [link to here]


Florent Robinet, florent.robinet@ijclab.in2p3.fr